• <nav id="28k6g"><legend id="28k6g"></legend></nav>
  • <blockquote id="28k6g"><table id="28k6g"></table></blockquote>
    聯系我們???Contact
    你的位置:首頁 > 新聞動態 > 公司新聞

    如何診斷百樂滿熱水器常見問題

    2017-8-30 14:30:10??????點擊:
        本文作者:百樂滿熱水器售后
      
      1-英文:Press the "On" button of the remote control to turn the water heater on if there is no hot water. Make sure the hot water faucet is open fully. Turn the water shutoff valve to open it completely.
      
      中文:如果沒有熱水,請按“開”的遙控打開熱水器。確保熱水水龍頭是完全打開,把水閥完全打開。
      
      2-英文:Increase the temperature on the water heater if there is not enough hot water. Ensure the hot and cold water lines are installed correctly. Reverse them, if needed.
      
      中文:如果沒有足夠的熱水,請增加熱水器的溫度。確保熱水和冷水管道安裝正確。如果相反,請調整好。
      
      3-英文:Turn the gas valve to open it fully if the water is not hot enough.
      
      中文:如果水不夠熱,請檢查煤氣閥門是否完全打開。
      
      4-英文:Decrease the temperature on the water heater if the water is too hot. Open the water shutoff valve fully.
      
      中文:如果水太燙,請調低熱水器的設定溫度,并完全打開冷水閥。   Error Codes 對錯誤代碼的處理。
      
      5-英文:Turn off the hot water faucet if an error code is displayed on the remote control. Press the "Off" button of the remote to turn off the water heater. Wait five minutes. Turn on the hot water faucet and press the "On" button of the remote. If the error code is still displayed, turn off the faucet, press the "Off" button on the remote andcontinue to the next step.  如果錯誤代碼顯示在遠程控制,關掉熱水水龍頭。按“關閉”按鈕,關閉熱水器。等待五分鐘,打開熱水水龍頭,按“開”的遙控按鈕。如果仍然顯示錯誤代碼,關掉水龍頭,按“關閉”按鈕,繼續下一步。
      
      6-英文:Open the gas shutoff valve completely if "11" is displayed on the remote control.
      
      中文:如果“11”顯示在顯示屏上,請完全打開排氣閥,再開機。
      
      7-英文:Refill the LP gas container or replace it with a new cylinder when "12" is displayed on the remote control. If you don't have an LP model, contact your utility company. This code indicates that the supply of gas has been interrupted.
      
      中文:如果補充的液化氣容器或更換新的氣缸時,“12”仍在顯示。如果你是使用管道氣,請聯系你的管道氣提供商。這個代碼顯示天然氣供應已中斷。
      
      8-英文:Open the hot water faucet completely if "15" is displayed on the remote control. This means there is not enough water volume to trigger the heater to heat the water.
      
      中文:完全打開熱水水龍頭,如果顯示“15”,這意味著沒有足夠的水量來觸發加熱器加熱水??赡苁撬畨翰粔?,或自來水的水量不足。
      
      9-英文:Remove any obstructions on the air intake or vent termination if "05" displays on the remote control. This indicates that the air intake is blocked.
      
      中文:如果顯示“05”, 這表明熱水器空氣的進氣管道的受阻,移開任何障礙進氣或排氣的物體。
      
      10-英文:Call for service if "13" or "1L" appears on the display; "1L" indicates lime deposits inside the water heater, while "13" indicates that the water heater requires service.
      
      中文:如果出現在顯示“13”和“1L”;“1L”表示有故障在熱水器內,而“13”表示熱水器需要的聯系服務商上門維修。
    2021国内精品久久久久免费
  • <nav id="28k6g"><legend id="28k6g"></legend></nav>
  • <blockquote id="28k6g"><table id="28k6g"></table></blockquote>